ASTM A403 WP347 / 347H Stainless Steel Pipe Bends
ASTM A403 WP347 / 347H Stainless Steel Pipe Bends, Global Supplier of SS WP347H Hot Induction Bend, Stainless Steel 347 Pipe Bend, Best Price of 347 Stainless Steel Mitered Pipe Bend Exporter, SS 347 Pipe Bends, Stainless Steel ASTM A403 UNS S34709 Seamless Pipe Bends Dealer in India.
Table Of Content
-
What is ASTM A403 347 / 347H SS Pipe Bends
-
Standard Specification For Stainless Steel ASTM A403 347 / 347H Pipe Bends
-
SS 347 / 347H Pipe Bends Manufacturing Standards
-
ASME SA403 347 / 347H Stainless Steel Buttweld Bend Equivalent Grades
-
Types Of Grade 347 / 347H Stainless Steel Pipe Bends
-
Chemical Composition of Grade 347 Stainless Steel Pipe Bends
-
Mechanical Properties of ASTM A403 SS 347 Pipe Bends
-
ASTM A 403 347 Stainless Steel Pipe Bends Available Types
-
Stainless Steel 347 Pipe Bends Application
-
Export Destinations for Grade 347 Stainless Steel Pipe Ben
We are disciplined and we are devoted to precision. We stand by the principles of quality and safety, thereby adopting standards and processes that are secure, quality-driven and assure maximum output. For this, we invest in premium resources and dependable technology and machinery. Our greatest strength, however, is our skilled workforce. We are a manufacturer, supplier and exporter of Stainless Steel 347 / 347H Pipe Bends which are Niobium stabilized stainless steel pipe bends that provide resistance to sensitization at higher temperatures. Our ASTM A 403 Stainless Steel 347 / 347H 1D Pipe Bends have a smoother bend that has a radius equal to 3x of the pipe’s diameter, suitable to use in the general refinery piping systems, where it counters general corrosion due to its good mechanical properties. UNS S34700/34709 Stainless Steel Hot Induction Pipe Bends are an inexpensive alternative compared to other costly bends, their induction bending process making it possible for us to sell them at affordable prices.
Manufacturer Of ASTM A403 347 Stainless Steel J Pipe Bend, ANSI B16.9 SS 347 1D Pipe Bends, 347H SS Welded Pipe Bend, Stainless Steel 347 Piggable Bends, Werkstoff No 1.4541 Stainless Steel High Pressure Bending, Stainless Steel DIN 1.4878 U Pipe Bend in Mumbai, India.
We supply SS WNR 1.4550/ WNR 1. 4961 Long Radius bends , Short Radius Bends to the cement, engineering and fertilizer industry. Also We offer wide range of Stainless Steel ASTM A403 347 Pipe Bends such as SS 347H Long Radius Bend, SS 347 Piggable Bend, SS 347H Hot Induction Bend, SS 347 Seamless Pipe Bend, SS 347 Welded Pipe Bend, SS 347H U Pipe Bend, SS 347 J Pipe Bend, SS 347H Mitered Pipe Bend, SS 347 3D Pipe Bend etc.
Wrought Austenitic Stainless Steel 347H 5D Pipe Bends, Stockholder Of Stainless Steel 347 10D Pipe Bends, Stockiest of Steel WP347 Long Radius Bend, ASME SA403M Stainless 347H Customized Pipe Bend Wholesaler, Stainless Steel WP347 45 Degree Pipe Bends Traders in India.
Supplies from Different Countries
| Flag | Country | Code |
|---|---|---|
| 🇮🇳 | India | IN |
| 🇺🇸 | United States | US |
| 🇬🇧 | United Kingdom | GB |
| 🇨🇳 | China | CN |
| 🇯🇵 | Japan | JP |
| 🇩🇪 | Germany | DE |
| 🇮🇹 | Italy | IT |
| 🇹🇷 | Turkey | TR |
| 🇦🇪 | United Arab Emirates | AE |
| 🇸🇦 | Saudi Arabia | SA |
| 🇶🇦 | Qatar | QA |
| 🇴🇲 | Oman | OM |
| 🇰🇼 | Kuwait | KW |
| 🇦🇺 | Australia | AU |
| 🇨🇦 | Canada | CA |
| 🇳🇱 | Netherlands | NL |
| 🇮🇩 | Indonesia | ID |
| 🇪🇬 | Egypt | EG |
Standard Specification For Stainless Steel ASTM A403 347 /347H Pipe Bend
Specifications: ASTM A403 & ASME SA403
Dimensions : ASME/ANSI B16.9 / B16.28 and MSS SP-43 / SP-75
Outer Diameter : 114.30 mm – 406.40 mm
Wall Thickness : 8.0 mm / 10.0 mm / 12.0 mm – greater wall thickness at request
Bending Radius(R): R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Bending angle (θ): 15°, 30°, 45°, 60°, 90°, 135°, 180
SS 347 / 347H Pipe Bends Manufacturing Standards:
ASME Pipe Bend |
ANSI B16.9, ANSI B16.28, MSS-SP-43 |
DIN Pipe Bend |
DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 |
EN Pipe Bend |
EN10253-1, EN10253-2 |
ASTM A403 |
ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
ASME B16.9 |
Factory-Made Wrought Fittings Buttwelding |
ASME B16.25 |
Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns |
MSS SP-43 |
Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications |
SPECIFIC/ SPECIAL REQUIREMENTS
-
Grain Size requirement
-
All H grades shall be tested for average grain size by Test Methods ASTM E112.
-
Grades F 304H, F 309H, F 310H, and F 316H shall have a grain size of ASTM No. 6 or coarser.
-
Grades F 321H, F 347H shall have a grain size of ASTM No. 7 or coarser.
-
-
Intergranular corrosion testing
-
All austenitic stainless steels shall pass intergranular corrosion tests performed in accordance with Practice E of Practices A 262.
-
For all H grades of austenitic stainless steel (like all H grades of SS309, 310, 316, 316) ASTM 262 Practice C with acceptance criteria of 15 mils/year shall have to be conducted
-
For the IGC test described above two sets of samples shall be drawn from each solution treatment lot; one set corresponding to highest carbon content and other corresponding to the highest rating/thickness.
-
-
Pickling and passivation to be carried out after forging.
MATERIAL DESCRIPTION, VISUAL AND DIMENSIONAL REQUIREMENTS
Material |
ASTM SA-403: Specification for Wrought Austenitic Stainless Steel Piping Fittings size -2” & above |
Service |
Mild to moderate corrosive process services – flammable/non-flammable & non-lethal, Demineralised water (outside DM plant battery limits), Polished water, Polished condensate, chemical etc. |
Dimensional Tolerances |
Dimensional/ tolerances as per ASME B16.9 |
Ends |
Beveled to ASME B 16.25 |
Manufacture |
Raw material:Steel should be melted using one of the following methods:
Forming process:ASTM A 403 -The finished part shall be manufactured from a forging or shaping operations may be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, machining, or by a combination of two or more of these operations. |
Surface Condition |
All pipe fittings shall be free of scale, rust, dust and suitable for inspection. |
Raw material should be chosen so that the final chemical composition and mechanical properties are not violated as mentioned in the standard.
NDT REQUIREMENTS
-
PMI testing of the fittings to be carried out.
-
Low chloride liquid penetrant testing on bevel edges to be carried-out (In accordance with the recommended practice of E-165)
-
Hardness testing to be carried out on all the austenitic stainless-steel grades and SA-213 material specification (Table-4) can be taken as reference for the acceptable criteria
-
Ultrasonic testing: Fitting shall be ultrasonically tested to determine its soundness in accordance with the practice of A388/A388M (For 10 % of the ordered quantity)
MECHANICAL REQUIREMENTS
Mechanical properties shall be as per Table 5 of SSA-403 specification of ASME Sec. II Part-A.
HEAT TREATMENT REQUIREMENTS
Sub-sequent to the solution annealing required by clause 6.2, Grades 321, 321H, 347, 347H, 348 and 348H shall be subjected to additional stabilization heat treatment at 815 -870°C for a minimum of 2h/inch of thickness and then cooling in the furnace or in air.
Hardness testing to be carried out on all the austenitic stainless-steel grades and acceptable criteria shall be as per table 4 of the SA-213 specifications.
MANUFACTURER’S TEST CERTIFICATE
Manufacturer, with each order of fittings shall submit a test certificate confirming/stating that the fittings have been manufactured and tested in accordance with standard stipulated including the clauses mentioned herein and have duly met the requirements. The Test Certificate shall clearly furnish the following information:
-
P.O. number / Certificate number and date. (Certificates without the P.O. number on it shall not be acceptable.)
-
Product description/ Dimensions/relevant standards.
-
Starting material.
-
Heat number.
-
Chemical and mechanical test results including Tensile Test, hardness testing.
-
PMI testing reports
-
Hardness, UT results.
-
Heat treatment details (type / temperature)
-
Stabilization heat-treatment details for SS321, SS347, SS347H
-
Identification marking as per ASME SSA-403
-
IGC test reports
-
Grain size results for ‘H’ grade materials
-
Third party inspection certificate / release note shall accompany the delivery of every consignment.
ASME SA403 347 / 347H Stainless Steel Buttweld Bend Equivalent Grades
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
GOST |
EN |
SS 347 |
1.4550 |
S34700 |
SUS 347 |
08Ch18N12B |
X6CrNiNb18-10 |
SS 347H |
1.4961 |
S34709 |
SUS 347H |
– |
X6CrNiNb18-12 |
Types Of Grade 347 / 347H Stainless Steel Pipe Bends
ASTM A403 SS WP347 / 347H Short Radius Bend
Chemical Composition of Grade 347 / 347H Stainless Steel Pipe Short Radius Bend
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Cb |
Ni |
Fe |
SS 347 |
0.08 max |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 – 20.00 |
10xC – 1.10 |
9.00 – 13.00 |
62.74 min |
SS 347H |
0.04 – 0.10 |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 – 19.00 |
8xC – 1.10 |
9.0 -13.0 |
63.72 min |
Mechanical Properties of ASTM A403 SS 347 / 347H Pipe Bend
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
8.0 g/cm3 |
1454 °C (2650 °F) |
Psi – 75000 , MPa – 515 |
Psi – 30000 , MPa – 205 |
35 % |
ASTM A403 347 / 347H Stainless Steel Pipe Bends Available Types
Stainless Steel 347 Pipe Bend |
Stainless Steel WP347H Buttweld Bend |
Stainless Steel 347H Mandrel Bends |
Stainless Steel 347 Long Radius Bend |
Stainless Steel UNS S34700 Piggable Bend |
Stainless Steel 347 Hot Induction Bend |
SS 347H Seamless Pipe Bend Suppliers |
ANSI 347 Welded Pipe Bend |
SS WP347 U Pipe Bend Dealer |
SS 347H J Pipe Bend Exporter |
SS UNS S34709 Mitered Pipe Bend Stockholder |
Steel 347 3D Pipe Bend Distributors |
Stainless Steel SUS 347 5D Pipe Bend |
SS 347H 10D Pipe Bend Manufacturer |
Stainless Steel DIN 1.4550 2.5D Pipe Bend |
Stainless Steel 347H Pipe Bend |
Stainless Steel WP347 Customized Pipe Bend |
Stainless DIN 1.4961 Bend |
ANSI B16.9 SS 347H 12D Pipe Bending |
SS 347 High Pressure Bending Stockist |
ASTM A403 SS 347 180 Degree Pipe Bend |
ASME SA403 SS 347 DIN Pipe Bend |
Stainless Steel 347 EN Pipe Bend |
347H SS ASME Pipe Bend |
A403 SS WP347H Small Size Pipe Bending |
ASME SA403M SS 347 Pipe Bend Elbow |
Steel 347H 90 Degree Pipe Bend |
SS WP347 180 Deg Pipe Bend |
|
|
Marking on ASTM A403 SS 347 / 347H Pipe Bend
Marked Pipe Sample: ASTM A 403 8″ NB SCH 160S SEAMLESS HEAT NO. XXXX |
ASTM A403 SS 347 / 347H Pipe Bend Pipe Inspection & Test reports
-
Mill Test Certificates with all ASTM A403 SS 347 / 347H Pipe Bend
-
EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
-
Third Party Inspection for Pipe
-
Mechanical Reports
-
Chemical Reports
-
PMI Test Reports
-
Visual Inspection Reports
-
Destructive Test Report
-
NABL Approved Lab Reports
-
Raw Materials Certificate
-
Non Destructive Test Reports
-
100% Radiography Test Report
-
Fumigation Certificates
-
HS Code Commercial Invoice
-
Heat Treatment Charts
-
Surface roughness measurement
-
Form A for Generalized System of Preferences (GSP)
-
Laboratory Test Certificate from Govt. Approved Lab
-
Moisture testing
Stainless Steel 347 / 347H Pipe Bends Application
ASTM A403 347 / 347H Pipe Bends are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of ASTM A403 347 / 347H Stainless Steel Buttweld Bend through a worldwide network of stock-keeping branches. These ASTM A403 347 / 347H Pipe Bend is use in various industries like :
-
Stainless Steel 347 Pipe Bends uses in Oil and Gas Pipeline
-
ASTM A403 SS 347H Pipe Bend uses in Chemical Industry
-
Grade WP347 Stainless Steel Buttweld Bend uses in Plumbing
-
Stainless Steel ASTM A403 347 Pipe Bends uses in Heating
-
ASTM A403 WP347H Pipe Bends uses in Water Supply Systems
-
ASTM A403 347 Stainless Steel Bends uses in Power Plant
-
SS 347H Pipe Bends uses in Paper & Pulp Industry
-
347 SS Buttweld Pipe Bend uses in General Purpose Applications
-
ASME SA403 SS 347H Pipe Bend uses in Fabrication Industry
-
Stainless Steel WP347 Pipe Bends uses in Food Processing Industry
-
ANSI SS 347H Pipe Bends uses in Structural Pipe
People Also Searched For
A Wide Range Of the Best Quality 347 Stainless Steel Pipe Bends, ss 347 Pipe Bend price list, ss 347 Pipe Bends price, ss 347H Pipe bends dimensions pdf, pre bent steel tubing, mandrel bent stainless steel 347H tubing, aluminum mandrel bends, mandrel bends exhaust, 2.5 mandrel bent exhaust pipe, 347 ss 180 degree pipe bender, mandrel bent tubing suppliers, ss 347 bend dimensions, Small size pipe bending, Large size pipe bending, Butt-welded pipe bending, 347H ss 180 Degree pipe bend Manufacturer, Supplier in India
Export Destinations For Grade 347 / 347H Stainless Steel Pipe Bends
MIDDLE EASTSaudi ArabiaIranIraqUaeQatarBahrainOmanKuwaitTurkeyYemenSyriaJordanCyprus |
AFRICANigeriaAlgeriaAngolaSouth AfricaLibyaEgyptSudanEquatorial GuineaThe Republic Of CongoGabonNORTH AMERICAUsaCanadaMexicoPanamaCosta RicaPuerto RicaTrinidad And TobagoJamaicaBahamasDenmark |
EUROPERussiaNorwayGermanyFranceItalyUkSpainUkraineNetherlandBelgiumGreeceCzech RepublicPortugalHungaryAlbaniaAustriaSwitzerlandSlovakiaFinlandIrelandCroatiaSloveniaMalta |
ASIAIndiaSingaporeMalaysiaIndonesiaThailandVietnamSouth KoreaJapanSri LankaMaldivesBangladeshMayanmarTaiwanCambodiaSOUTH AMERICAArgentinaBoliviaBrazilChileVenezuelaColombiaEcuadorGuyanaParaguayUruguay |
